A rare opportunity, a never chartered 3 Cabin Seawind 1250. She has all the luxury fittings from solid timber finishing, a Spectra 12V watermaker, Fisher Panda Generator with low engine hours,  Achilles HB 315 LX tender with a 9.9hp outboard HF Marine transceiver, Raymarine Navigation electronics with autopilot, Radar & AIS, with multiple displays. Haier cloths washer and much, much more. Get ready to go cruising now. Don’t stand on the shore waiting to get a beautiful, high quality Seawind catamaran.

If you’re interested in coming aboard this hard to find rare value performance cruising catamaran, give us a call today. She won’t last long!

Seawind 1250

2015 SEAWIND 1250 (12.50 METRES / 41 ft)

  1. GENERAL: The overall finish of the Seawind 1250 will be consistent with a luxury world-standard yacht of this size and type. Only very high quality equipment is used throughout.
    The overall aim is for a level of construction, workmanship, equipment, fitout and style that surpasses any other comparable catamaran available in the market at this price range.
    Finish: Full female moulded hulls & decks, exterior gelcoat finish with moulded-in non-slip surface on deck areas.
    Hull Laminate: Vinyl Ester (Modified epoxy) resin laminate of the hulls between the gelcoat and the foam core. Polyester resin elsewhere. Laminate specifications are to Australian survey compliant and international standards including European CE certification.
    • Clear anodised aluminium mast and boom. Single Spreader, 7/8 rig.
    • Standing Rigging – Forestay 3/8 (10mm) 1 x 19 Dieform wire.- Sidestays 3/8 (10mm) 1 x 19 Dieform wire- Diamonds 5/16 (8mm) 1 x 19 Dieform wire. All fitted with turnbuckles and T-ball end fittings.
    • Halyards – Main halyard: 12 mm Spectra rope : Heavy duty shackle. – Genoa halyard: 8 mm Spectra rope. Heavy duty shackle.- Topping lift: 10 mm rope, Heavy duty shackle.- Spinnaker Halyard: 12mm rope with snap-shackle spliced to end.
    • Boom outhaul.
    • 2 x mainsail single line reefing fitted.
    • All halyards, reefing lines to be lead back to cockpit through turning blocks, rope clutches.
    • Fully battened mainsail – Fibreglass sail battens. Roller bearing batten cars.
    • Cruising mainsail cover with integrated lazy jack system.
    • Self-tacking headsail on Profurl C420 Furler . Curved headsail traveller track with end stops. Control sheet to cockpit.
    • Aluminium Hatches & portholes (9 in total)4 x Forward Hatches 470mm x 470mm
      2 x Mid cabin hatches 470mm x 470mm
      1 x Port Bathroom window hatch 507mm x 377mm
      1 x Galley window hatch 507mm x 377mm
      2 x Aft Cabin window hatch (1 x Port, 1 x Starboard) 507mm x 377mm
    • Fibreglass Deck Hatches:
      Forward anchor & storage hatches x 5
    • Cockpit storage hatches
    • Cockpit Icebox & hatch
    • 6 x Docking cleats. Each side: bow, stern & amidships.
    • 1 x Heavy duty mooring cleat on forward walkway.
    • Ventilation: 2 x forward cabin hatch vents.
    • Mast base turning blocks. All halyards & sail controls to cockpit.
    • 12 x Rope clutches.
    • Manual Sheet winches: 1 x 46ST – 2 speed self tailing & 2 x 40ST – 2 speed self tailing.
    • Stanchions/Rails: High quality stanchions, bow rails and stern rails with 3 life-lines. 700mm high tomeet Australian survey requirements..
    • 2 x transom access gates with pelican hook releases.
    • 2 x side access gates with pelican hook releases.
    • Aft swim ladder: folding stainless aft swim ladder.
    • Forward beam section 125 x 3mm.Adjustable pelican striker and cable.
    • 1 x Mooring rollers above foredeck.
    • 2 x Anchor roller under deck. Permanent stowage position for 45lb CQR anchor. (cheeks 75mm high).
    • Catwalk in foam-sandwich fibreglass.
    • Plastic coated open weave trampolines.
    • Moulded fibreglass Targa Bar with curved mainsheet track.
    • Stainless steel framed slatted seats behind aft beam. Fibreglass top table between seats.
    • Stainless steel Cookout BBQ.
    • Stainless steel dinghy davits.
    • Twin raised helm stations (dual) with hinging backrests Vinyl Upholstered: 2 X 32” stainless steel steeringwheels.
    • Both wheels independently linked to steering system. – system offers back-up redundancy.

• Helm seats with ice box under port side and storage under starboard side.

D/C SYSTEM: Three West Marine 40 AGM batteries 1245 MCA and one Intimidator 8A310TM battery. Mastervolt 12/75-3 Battery Charger,

A/C SYSTEMS: 30A/125V shore power inlet to port, shore power cord, source selector on A/C panel, 60Hz system, 120 volt

    • Beech finish interior.
    • Sides and cabin top lined with vinyl or moulded gelcoat.
    • Floors : Common area soles simulated teak with holly inlay.
    • Ornate polished timber dining table: Lowers to create coffee table or double bed.
    • Upholstered settee with day lounge
    • Cocktail cabinet/storage under day lounge
    • Polished timber chart table
    • Forward opening windows in 10mm toughened glass in marine anodised aluminium frame. Side windowsin 6mm toughened glass.
    • Simulated teak & holly flooring.
    • Saloon / cockpit doors: Moulded gelcoat tri-fold doors. Complete with folding mechanism for foldinginto Targa walkway.
    • Spacious galley with co-ordinated Polystone counter surfaces, timber accents.
    • Three (3 ) burner LPG stove & oven. Stainless steel pot holders. Flame failure device to shut off LPGimmediately in event of flame going out.
    • Double bowl stainless steel sink.
    • Pressure hot & cold fresh water system. Single lever mixing tap.
    • Refrigerator : Front opening upright Isotherm fridge 130 liters.
    • Spacious freezer – large 60 litre draw loading, heavily insulated. 12volt Eutectic system by ICEER.
    • Under bench storage with polished timber door fronts & cutlery drawers.
    • Inboard side of galley: Over-bench cupboard with sliding door fronts
    • Simulated teak & holly flooring.
    • LPG solenoid control in galley
    • Polished timber solid doors on all private cabins.
    • Port & Starboard fwd cabins : Each queen sized bed (2050mm x 1540mm)
    • Aft Starboard cabin : Double bed (1990mm x 1230mm)
    • Mattresses to be 150mm ( 6” ) quilted foam upholstered.
    • Cabins lined.
    • Recessed 12volt lighting.
    • Storage/Cupboards.
    • Carpeted floors.
  5. PORT HEAD :
    • Polished timber solid lockable door.
    • Manual toilet. Discharge via holding tank.
    • Holding tanks built in. Discharge Pump out by shore station or directly overboard. Port 130L and Stb110L.
    • Pipes, skin fittings and sea-cocks are easily accessible and to meet survey requirements.
    • Vanity basin with pressure hot & cold water.
    • Wall mounted shower head & mixer tap.
    • Electric shower bilge pump with direct overboard discharge.
    • Large quantity cupboards / shelves to very high quality.
    • Toilet roll holder, towel rack & mirror mounted.
    • Polished timber solid lockable door.
    • Manual toilet. Discharge via holding tank.
    • Holding tank built in. Discharge Pump out by shore station or directly overboard.
    • Pipes, skin fittings and seacocks to be easily accessible and to meet survey requirements.
    • Vanity basin with pressure hot & cold water. Shower head and basin mixer tap with electric shower bilgepump.
    • Cupboard/shelves to very high quality.
    • Toilet roll holder, towel rack & mirror mounted.
    • High quality DC electrical switch panel with circuit breakers, LED indicator lights and voltage display.
    • Marine grade tinned electrical wiring with extensive use of heat sealed connectors..
    • 230amp heavy duty isolation switch.
    • BEP Battery Monitor
    • 12 V lighting : Numerous 12V LED interior lamps and courtesy lights throughout including recessed lightsin cockpit. Dome lights in cockpit. (All lights except fluros are LED)
    • 4 x 12V Outlets.
    • Survey approved LED navigation lights. Port & Starboard mounted on bow rails.
    • Deck floodlight mounted on spreaders.
    • Mast head anchor / riding light.


    • Electric two direction anchor winch with chain & gypsy. Located under locker to give clean deck. Primary anchor is 60lb Lewmar with 350′ galvanized chain.
    • Primary anchor is stored in a specially designed anchor roller under the forward beam.
    • Anchor winch has foot switch at the winch plus a remote up / down control at the helm station.
    • 5 x PVC Inflatable Fenders
    • 4 x Mooring lines
    • Epoxy barrier coat plus 2 coats of high quality Altex antifouling bottom paint.
    • Seawind 1250 decals on each hull and stern.

Current Price: $ 489,000

Contact Us About This Boat