Corsair 970 Specifications

Corsair 970 Specifications
Keel: Centerboard
Hull Shape: Trimaran
LOA: 32 ft 0 in
Beam: 22 ft 7 in
LWL: 32 ft 0 in
Minimum Draft: 1 ft 5 in
Maximum Draft: 6 ft 10 in
Displacement: 4000 lbs
Fresh Water Tanks: 1
Holding Tanks: 1
Number of cabins: 2
Electrical Equipment
Electrical Circuit: 12V



  • 13.5m painted Carbon mast and Carbon boom
  • Synthetic dyneema cap shrouds
  • 1×19 stainless steel forestay
  • Single line reefing, run to helm.
  • Three reefing points with 2 reef lines
  • Size 35.2 winch mounted on mast 

Deck Equipment

  • Aluminium Hatches & portholes (8 in total)
  • Harken Sheet winches : 2 x size 40 – 2 speed self tailing primary, 2 x size 40 – 2 speed self tailing combing winches.
  • 2 x PVC coated float nets
  • 2 x PVC coated bow nets
  • Aft removable swim ladder
  • Aft raised mainsheet traveler
  • Removable aft helm seats
  • Performance Package: 2 Barber haulers with twin blocks
  • Spinnaker Control Kit: Sheets, tackline, Snap shackles, blocks, winch handle.
  • Screecher Control Kit: Bartel’s FEII Screecher furler unit, sheets, web straps

Sleeping Cabins

  • Mattresses 150mm ( 6” ) foam upholstered
  • Cabins finished in white easy to clean flowcoat
  • 12volt LED lighting
  • Storage/Cupboards

Lighting/Electrical Systems

  • High quality DC electrical switch panel with circuit breakers, LED indicator lights and voltage display
  • Marine grade tinned electrical wiring with extensive use of heat sealed connectors
  • Heavy duty isolation switch
  • 12V lighting : Numerous 12V interior lamps and courtesy lights throughout
  • 1 x 12V Outlets CE approved navigation lights. Port & Starboard mounted on bow rails
  • Mast head anchor / riding light.

Plumbing/Fresh Water Tanks

  • Pressure water system with water to galley and bathroom
  • Electric fresh water pump
  • 39 gallon Water tank
  • Manual bilge pump
  • (1) Marelon through-hull fittings to CE/ISO standard
  • Manual toilet in head


  • Manual Marine toilet.
  • 13 gallon Holding tank. Discharge pump out by shore station or directly overboard 
  • Pipes, skin fittings and sea-cocks are easily accessible and to meet CE requirements
  • Vanity basin with pressure water
  • Separate shower stall with wall mounted shower head & mixer tap
  • Electric shower bilge pump with direct overboard discharge
  • Large quantity cupboards / shelves to very high quality


  • Spacious galley with lightweight carbon fiber benchtop
  • LPG 2-burner stovetop
  • Large stainless steel sink
  • Pressure fresh water system
  • Under bench storage
Interior Finish
Furniture and cabin sides gloss gelcoat finish Saloon cabin top lined with molded frp gelcoat liner. Floors: synthetic timber flooring. Timber doors and cupboards.

Exterior Specifications

  • Finish: Full female moulded hulls & decks, exterior gelcoat finish with moulded-in non-slip surface on deck areas
  • Hull Laminate: Infused Vinyl Ester (Modified epoxy) resin laminate of the entire hull laminate. Fiberglass construction with use of carbon fiber as structural reinforcement.
  • Hull Core Material: PVC closed cell foam core
  • Deck Laminate: Infused Vinyl Ester (Modified epoxy) resin laminate of the entire hull laminate.
  • Deck Core Material: PVC closed cell foam core
  • General Laminate: Vacuum formed polyester resin laminate
  • General Core Material: PVC closed cell foam core Laminate specifications are certified to International CE standards Standard 970 Sport decal and striping.

Sail Inventory

  • Fully battened mainsail: Triple stitched reinforced construction: Aramid laminate. Fiberglass sail battens
  • Roller Furling Jib: :Aramid laminate.
  • Spinnaker 
  • Racing Screeching
  • Mainsail Cover

Ground Tackle/Mooring

  • Anchor & Rode
  • Docking Kit: 3 Fenders, 2 Mooring lines, & Boat hook

Navigation Equipment

  • Windex
  • Navigation Package: B&G 7” Color Chartplotter, Autopilot, Speed & Depth Transducers
  • B&G VHF Radio
  • Compass